| 1. | Optical coatings - part 1 : minimum requirements for antireflection coatings
光学涂层.第1部分:抗反射涂层的最低要求 |
| 2. | Design and fabrication of the broadband infrared antireflection coating on pbmoo4 single crystal in vacuum are explored theoretically and experimentally
本文从理论和实验两个方面讨论了钼酸铅晶体表面的宽带红外增透膜的设计以及其在真空环境中的制备。 |
| 3. | The studies suggest that the antireflection coating has excellent properties as the result of film design , and will be widely used in the fiber optical communication industries
研究表明，以膜系设计的结果为参照，实际所镀膜层性能优异，在光纤通讯领域具有广阔的应用前景。 |
| 4. | Antireflection coating . a thin , dielectric or metallic film applied to an optical fiber surface to reduce its reflection and thereby increase its transmitting ability
抗反光涂层。一种薄的绝缘体或金属薄膜（或者是类似薄膜） ，贴在光纤表面以减少反射，并以此而提高光纤的发射能力。 |
| 5. | Antireflection coatings is designed by using the advanced software for optics design , in the process of design the combination of the design software and the classical idea of design to film coefficient is adopted
借助先进的光学设计软件tfc3 . 5分析设计了减反射膜，设计过程中采用设计软件与经典的膜系设计思想相结合的方法。 |
| 6. | The results indicate that the two layer antireflection coating of ta2o5 / sio2 could achieve the aim of low reflectance in the broad wave band by the optimization . numerous experiments and a series of testing have been carried out
理论分析与计算结果表明，双层增透膜ta _ 2o _ 5 sio _ 2系最优化设计的结果，能够达到宽波段范围内的增透效果。 |
| 7. | On the basis of the underlying principles in the optical thin film design , by adopting the method of recursion and matrix , we get the mathematical model for the single layer antireflection coating and the multi - layer coating , which have their characteristic reflectance changes
以光学薄膜设计中的隐含规律为基础，采用递推法、矩阵法，分别对单层及多层增透膜的反射率变化建立了理论模型，并在特定的边界条件下进行了求解和理论计算。 |
| 8. | This paper mainly discusses the performance specification of plasma source ( gis ) , technology and quality of tio2 and sio2 coatings and the technology for large antireflection coatings deposited with plasma - iad . the research shows that the index of optical coating increases remarkably by using plasma ion assisted deposition and approach to the massive material further , the coating structure is more compacted than the one obtained through conventional deposition method and the adhesive power is high as well
研究了用于辅助镀膜的等离子体源( gis )的结构原理及性能指标，并从光学特性、显微特性和机械特性三方面着手，研究了使用等离子体源所做的单层tio _ 2膜和单层sio _ 2膜的成膜工艺与质量。 |
| 9. | An attempt is made to use the filled function as the modified function approach to apply global optimization to optical thin film problems . it is proved successful when applied to problems such as antireflection coatings and beam spliters . meanwhile , it is also found that when the number of layers is fixed those local minima with less total optical thickness appear to be better . in the realization . needle method are made to explore the impact of local optimization methods used , parameter of these methods , the starting design , the search accuracy of function and the methods of thickness growth
从理论分析来看,由于光学薄膜的特性是由在入射介质那一侧的等效导纳所确定的, needle方法把等效导纳作为状态变量,把每一层的折射率作为控制变量,运用最优控制的原理计算出在薄膜内部每一个厚度对应的点上折射率改变所引起的评价函数的改变,由此选取改变折射率后评价函数变化最大(评价函数变小)的那一点进行插入。 |
| 10. | The resulted films were densely packed uniform amorphous films with substantial overlap between adjacent si02 layers , and can serve the function as antireflection coatings . colloidal ti02 particles of 3 ~ 4nm in diameter were prepared using tetra - h - butyl titauate as precursor , and composite multilayer films of pss / tio2 were electrostatically self - assembled
二氧化硅胶体与聚合物pdda的自组装多层复合薄膜为均匀、致密的非晶态膜，复合薄膜内存在层间穿插的现象，薄膜表现出均质单层光学涂层的特性并具有增透作用。 |
